Self stick tiles are some DIYer’s best friends but also the bane of many with tiles coming back up, not lining up, etc… Here are a few tricks that should help you succeed. Proper prep is key – you should never go over other tiles especially if there are issues with them Whatever the substrate […]

Measure twice & cut once – sage advice but why do people seemingly always end up with trim either too long or too short? There are generally three main reasons: the tape itself has some slop in it (butted versus pulled), they cut on the wrong side of the line / take the line (most […]

Cast iron is used in many products that range from woodworking tools like table saw tops to cooking pans and for many good reasons. The only downside though besides it weight is if one doesn’t take care of it, it can rust. In most cases a little surface rust is no big deal as there […]

Ever noticed that the water coming from the shower seems to be so much hotter during the summer as compared to the winter? Tired of the kids taking super hot showers and using up all the hot water? Sorry we can’t help you on the time aspect (that’s your battle though they do have timers for showers…), but […]

I opened up my walls and there is this black (or brown) fiber board where I should see exterior sheathing… This generally leads most to ask; just what is it, followed up by, it has pulled away from the studs is there a way to fix it without tearing off the exterior siding. Oh wait, is […]

Believe it or not, Matthew just turned one & when he gets moving watch out. One of the more interesting aspects is looking at all the information out there on topics like kid proofing a home. We have two guest posts on this topic from 6 easy tips, to renovations. Needless to say some you find out […]

An aerator is most commonly attached to a faucet to not only catch particulates in the water (no one likes sand in their water glass) but more importantly creating a non-splashing stream of water which is generally done by mixing water and air. If you are like most people you don’t think twice about them until the […]

One of the lessons we quickly learned was when one builds a work bench and you don’t want issues with sagging, it is best to utilize a box beam (aka torsion box) type design. While I didn’t have a work bench that needs to be built, we decided that we needed to add a built in desk in […]